FREE SHIPPING
Kevlar ® 29 Style 745 Ballistic Grade Fabric Swatch 12" x 9" (AMERICAN MADE )
This Kevlar® is made from DuPont™ Aramid Yarn and woven into a fabric on weaving looms. It is used primarily in the Safety & Personal Protection Markets. It can be found and used in a number of personal protection applications including but not limited to: Bullet Resistant Vests, Car Armor, Cockpit Door Armor, Bullet Resistant Panels, Bomb Blankets, Fragmentation protection and many non-ballistic Industrial uses. Kevlar can be sewn into multiple plies and is not needle resistant, it can be glued using a polyurethane based glue, it can also be used with Epoxy resins.
Weight: 14oz. Sq.yd
Width: 12 inch by 9 inch
Denier: 3000
Weave: Plain
Thickness: 24.1 (mils) 0.61 (mm)
Breaking Strength: Length & Width Directions
Length: 1600 (lbf/in)
Width: 1800 (lbf/in)
Thread Count: 17 x 17 Length & Width
Used in a number of personal protection applications including but not limited to Body, Car and Cockpit Door Armor.
***. IMPORTANT NOTE: It takes multiple plies / Layers of this fabric to make something bullet resistant. CERTIFICATION: Testing of your design or application is highly recommended. If you desire to have your end product certified for ballistic protection you can contact US Test Labs, or HP White Laboratory. If you desire to have ballistic certification, Kevlar® fabric by itself in a single ply is not rated for any ballistic protection level, it is what you design and make that will get the certification rating. In other words, you have to make something with this fabric such as a Vest, or Kevlar Panel or in this case "your application" and then have it tested at a Ballistic Test Lab to get ballistic certification.
DuPont™ and Kevlar® are trademarks or registered trademarks of affiliates of DuPont de Nemours, Inc.
© 2024 DuPont. All rights reserved. DuPont™, the DuPont Oval Logo, and all trademarks and service marks denoted with TM, SM or ® are owned by affiliates of DuPont de Nemours, Inc. unless otherwise noted.